BorlandTalk.com Borland discussion newsgroups   Archives   FAQ   Search   Memberlist   Usergroups   Register   Profile   Log in to check your private messages   Log in  Still at Update 1 after installing Update 2 on D2005 Pro Goto page 1, 2  Next          BorlandTalk.com Forum Index -> Delphi Installation View previous topic :: View next topic   Author Message Rob Roberts Guest Posted: Fri Mar 11, 2005 8:39 pm    Post subject: Still at Update 1 after installing Update 2 on D2005 Pro I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Graham Waldon Guest Posted: Fri Mar 11, 2005 8:39 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro The same has happened to me. Examination of the date stamps of files in the BDS directory shows changed directory dates but no changed file dates. "Rob Roberts" <robrRemoveThis (AT) AndThisToo (DOT) pcisys.net> wrote Quote: I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Rob Roberts Guest Posted: Fri Mar 11, 2005 10:27 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Reported as QC report #11315. (Sigh...) --Rob Roberts "Graham Waldon" <graham.mungled.waldon (AT) mungled (DOT) ntlworld.com> wrote in message news:423201f9$1 (AT) newsgroups (DOT) borland.com... Quote: The same has happened to me. Examination of the date stamps of files in the BDS directory shows changed directory dates but no changed file dates. "Rob Roberts" <robrRemoveThis (AT) AndThisToo (DOT) pcisys.net> wrote in message news:4231fefe$1 (AT) newsgroups (DOT) borland.com... I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Ivo Bauer Guest Posted: Sun Mar 13, 2005 9:46 am    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Hi, Rob! Rob Roberts wrote: Quote: I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. I've been experiencing the same problem (see my comment on your QC entry). I'd guess that this problem is somehow related to the new patching system in the Update 2. According to what Allen Bauer said, the Update 1 consists of full file images whereas the new Update 2 contains only a patches to already installed fiel images. As it turns out, the install of Update 2 works well with plain D2005 Pro with no previous update packs installed. It's sad because I don't really want to reinstall the whole think and waste another online registration attempt (they're limited you know). -- Ivo Bauer OZM Research, s.r.o. http://www.ozm.cz/ _____________________________________________ ModLink - http://www.ozm.cz/ivobauer/modlink/ Implement MODBUS Messaging Services in Delphi _____________________________________________ Back to top Tony Wakefield Guest Posted: Sun Mar 13, 2005 11:37 am    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Ivo, I did not have to re-register with a un-install re-install it keeps the licience info intact. Just remember to be logged in as Administrator (thats ctrl alt del *2 at login screen.. Tony "Ivo Bauer" <abuer (AT) zom (DOT) zc> wrote Quote: Hi, Rob! Rob Roberts wrote: I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. I've been experiencing the same problem (see my comment on your QC entry). I'd guess that this problem is somehow related to the new patching system in the Update 2. According to what Allen Bauer said, the Update 1 consists of full file images whereas the new Update 2 contains only a patches to already installed fiel images. As it turns out, the install of Update 2 works well with plain D2005 Pro with no previous update packs installed. It's sad because I don't really want to reinstall the whole think and waste another online registration attempt (they're limited you know). -- Ivo Bauer OZM Research, s.r.o. http://www.ozm.cz/ _____________________________________________ ModLink - http://www.ozm.cz/ivobauer/modlink/ Implement MODBUS Messaging Services in Delphi _____________________________________________ Back to top Ivo Bauer Guest Posted: Sun Mar 13, 2005 1:37 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Hi, Tony! Tony Wakefield wrote: Quote: I did not have to re-register with a un-install re-install it keeps the licience info intact. Just remember to be logged in as Administrator (thats ctrl alt del *2 at login screen.. Thanks! This is the same thing I was told a while ago in the non-tech group. Reinstalled Delphi, then applied Update 2 while bypassing to install Update 1 and everything works flawlessly! -- Ivo Bauer OZM Research, s.r.o. http://www.ozm.cz/ _____________________________________________ ModLink - http://www.ozm.cz/ivobauer/modlink/ Implement MODBUS Messaging Services in Delphi _____________________________________________ Back to top Charles Appel Guest Posted: Sun Mar 13, 2005 4:11 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro "Tony Wakefield" <tonywakefield (AT) iprimus (DOT) com.au> wrote Quote: Ivo, I did not have to re-register with a un-install re-install it keeps the licience info intact. Just remember to be logged in as Administrator (thats ctrl alt del *2 at login screen.. It took 59 minutes, including the uninstall - but it seems to have worked. Thanks. :^) So far, I have imported fourteen small D4 projects into D2005, converted them (W32) and made a few cosmetic changes. All has gone smoothly - so far. -- Charles Appel "A generation which ignores history has no past - and no future." Robert Anson Heinlein Back to top Rob Roberts Guest Posted: Sun Mar 13, 2005 4:16 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Ivo, Yes, I saw your message in non-tech saying that an uninstall/reinstall and then apply Update 2 worked. I suppose I'll need to do that, although I'm not looking forward to it, what with having to reinstall third party packages. --Rob Roberts "Ivo Bauer" <abuer (AT) zom (DOT) zc> wrote Quote: Hi, Rob! Rob Roberts wrote: I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. I've been experiencing the same problem (see my comment on your QC entry). I'd guess that this problem is somehow related to the new patching system in the Update 2. According to what Allen Bauer said, the Update 1 consists of full file images whereas the new Update 2 contains only a patches to already installed fiel images. As it turns out, the install of Update 2 works well with plain D2005 Pro with no previous update packs installed. It's sad because I don't really want to reinstall the whole think and waste another online registration attempt (they're limited you know). -- Ivo Bauer OZM Research, s.r.o. http://www.ozm.cz/ _____________________________________________ ModLink - http://www.ozm.cz/ivobauer/modlink/ Implement MODBUS Messaging Services in Delphi _____________________________________________ Back to top Ivo Bauer Guest Posted: Sun Mar 13, 2005 6:33 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Hi, Rob! Rob Roberts wrote: Quote: Yes, I saw your message in non-tech saying that an uninstall/reinstall and then apply Update 2 worked. I suppose I'll need to do that, although I'm not looking forward to it, what with having to reinstall third party packages. Yes, that would definitely be a time consuming task but currently it is unavoidable (until Borland provides us with a new update). Although I'm a loyal Borland customer I'm quite surprised that they didn't catch this issue during the test phase. Strange. -- Ivo Bauer OZM Research, s.r.o. http://www.ozm.cz/ _____________________________________________ ModLink - http://www.ozm.cz/ivobauer/modlink/ Implement MODBUS Messaging Services in Delphi _____________________________________________ Back to top Brindha Ramakrishnan Guest Posted: Mon Mar 14, 2005 11:44 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Unfortunately, we couldn't reproduce this problem internally. I'd appreciate if one of you can take the time to uninstall the product, re-install from CD and then apply the patches to reproduce this and send me the log file. When you install the product, please use <SystemFolder>msiexec.exe /i "<.msi file>" /L*v "<logfile>" DEBUG_MODE=ON E.g. msiexec.exe /I "Borland Delphi 2005 Architect.msi" /L*v "C:tempd2005_arch.log" DEBUG_MODE=ON And install the patch from command line using the following syntax: <patch_exe> /V"/L*v <logfile> DEBUG_MODE=ON" E.g. d2005_arch_upd2.exe /V"/L*v C:tempd2005_upd1.log DEBUG_MODE=ON" Please send these log files directly to me. Thanks, Brindha. "Rob Roberts" <robrRemoveThis (AT) AndThisToo (DOT) pcisys.net> wrote Quote: I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Steve Winsett Guest Posted: Mon Mar 14, 2005 11:51 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Brindha, what you are asking in your request I believe would fix the install i.e.: uninstall all | reinstall d2005 and then apply update 2 problem is D2005 Pro installed and 1st Update 1 release installed - at this point update 2 will go through the entire installation without updating any files. thus your request may not revel any problems - Steve "Brindha Ramakrishnan" <Brindha.Ramakrishnan (AT) borland (DOT) com> wrote Quote: Unfortunately, we couldn't reproduce this problem internally. I'd appreciate if one of you can take the time to uninstall the product, re-install from CD and then apply the patches to reproduce this and send me the log file. When you install the product, please use SystemFolder>msiexec.exe /i "<.msi file>" /L*v "<logfile>" DEBUG_MODE=ON E.g. msiexec.exe /I "Borland Delphi 2005 Architect.msi" /L*v "C:tempd2005_arch.log" DEBUG_MODE=ON And install the patch from command line using the following syntax: patch_exe> /V"/L*v <logfile> DEBUG_MODE=ON" E.g. d2005_arch_upd2.exe /V"/L*v C:tempd2005_upd1.log DEBUG_MODE=ON" Please send these log files directly to me. Thanks, Brindha. "Rob Roberts" <robrRemoveThis (AT) AndThisToo (DOT) pcisys.net> wrote in message news:4231fefe$1 (AT) newsgroups (DOT) borland.com... I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Rob Roberts Guest Posted: Tue Mar 15, 2005 1:42 am    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Brindha, Quote: Unfortunately, we couldn't reproduce this problem internally. As Steve mentioned, the problem seems to he happening to people who installed the FIRST Update 1, not the second. Have you tried that? --Rob Roberts Back to top Brindha Ramakrishnan (Bor Guest Posted: Tue Mar 15, 2005 7:52 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Sorry, i thought this happens also with the 2nd Update 1 that was released on Jan. We are trying to reproduce this internally. Will keep you updated. Thanks, Brindha. "Steve Winsett" <steve@[no spam]winsett.com> wrote Quote: Brindha, what you are asking in your request I believe would fix the install i.e.: uninstall all | reinstall d2005 and then apply update 2 problem is D2005 Pro installed and 1st Update 1 release installed - at this point update 2 will go through the entire installation without updating any files. thus your request may not revel any problems - Steve "Brindha Ramakrishnan" <Brindha.Ramakrishnan (AT) borland (DOT) com> wrote in message news:42361f98$1 (AT) newsgroups (DOT) borland.com... Unfortunately, we couldn't reproduce this problem internally. I'd appreciate if one of you can take the time to uninstall the product, re-install from CD and then apply the patches to reproduce this and send me the log file. When you install the product, please use SystemFolder>msiexec.exe /i "<.msi file>" /L*v "<logfile>" DEBUG_MODE=ON E.g. msiexec.exe /I "Borland Delphi 2005 Architect.msi" /L*v "C:tempd2005_arch.log" DEBUG_MODE=ON And install the patch from command line using the following syntax: patch_exe> /V"/L*v <logfile> DEBUG_MODE=ON" E.g. d2005_arch_upd2.exe /V"/L*v C:tempd2005_upd1.log DEBUG_MODE=ON" Please send these log files directly to me. Thanks, Brindha. "Rob Roberts" <robrRemoveThis (AT) AndThisToo (DOT) pcisys.net> wrote in message news:4231fefe$1 (AT) newsgroups (DOT) borland.com... I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Brindha Ramakrishnan (Bor Guest Posted: Tue Mar 15, 2005 8:11 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro Are you sure you had the first Update 1 installed?Because there is an install issue with Update 2 failing right at the beginning if Update 1 (English Only) that was released last December is found to be installed on the machine. Thanks, Brindha. "Steve Winsett" <steve@[no spam]winsett.com> wrote Quote: Brindha, what you are asking in your request I believe would fix the install i.e.: uninstall all | reinstall d2005 and then apply update 2 problem is D2005 Pro installed and 1st Update 1 release installed - at this point update 2 will go through the entire installation without updating any files. thus your request may not revel any problems - Steve "Brindha Ramakrishnan" <Brindha.Ramakrishnan (AT) borland (DOT) com> wrote in message news:42361f98$1 (AT) newsgroups (DOT) borland.com... Unfortunately, we couldn't reproduce this problem internally. I'd appreciate if one of you can take the time to uninstall the product, re-install from CD and then apply the patches to reproduce this and send me the log file. When you install the product, please use SystemFolder>msiexec.exe /i "<.msi file>" /L*v "<logfile>" DEBUG_MODE=ON E.g. msiexec.exe /I "Borland Delphi 2005 Architect.msi" /L*v "C:tempd2005_arch.log" DEBUG_MODE=ON And install the patch from command line using the following syntax: patch_exe> /V"/L*v <logfile> DEBUG_MODE=ON" E.g. d2005_arch_upd2.exe /V"/L*v C:tempd2005_upd1.log DEBUG_MODE=ON" Please send these log files directly to me. Thanks, Brindha. "Rob Roberts" <robrRemoveThis (AT) AndThisToo (DOT) pcisys.net> wrote in message news:4231fefe$1 (AT) newsgroups (DOT) borland.com... I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Steve Winsett Guest Posted: Tue Mar 15, 2005 10:07 pm    Post subject: Re: Still at Update 1 after installing Update 2 on D2005 Pro My version in D2005 | About is 9.0.1761.24408 if that helps "Brindha Ramakrishnan (Borland)" <Brindha.Ramakrishnan (AT) borland (DOT) com> wrote in message news:423741a1$1 (AT) newsgroups (DOT) borland.com... Quote: Are you sure you had the first Update 1 installed?Because there is an install issue with Update 2 failing right at the beginning if Update 1 (English Only) that was released last December is found to be installed on the machine. Thanks, Brindha. "Steve Winsett" <steve@[no spam]winsett.com> wrote in message news:42362397$1 (AT) newsgroups (DOT) borland.com... Brindha, what you are asking in your request I believe would fix the install i.e.: uninstall all | reinstall d2005 and then apply update 2 problem is D2005 Pro installed and 1st Update 1 release installed - at this point update 2 will go through the entire installation without updating any files. thus your request may not revel any problems - Steve "Brindha Ramakrishnan" <Brindha.Ramakrishnan (AT) borland (DOT) com> wrote in message news:42361f98$1 (AT) newsgroups (DOT) borland.com... Unfortunately, we couldn't reproduce this problem internally. I'd appreciate if one of you can take the time to uninstall the product, re-install from CD and then apply the patches to reproduce this and send me the log file. When you install the product, please use SystemFolder>msiexec.exe /i "<.msi file>" /L*v "<logfile>" DEBUG_MODE=ON E.g. msiexec.exe /I "Borland Delphi 2005 Architect.msi" /L*v "C:tempd2005_arch.log" DEBUG_MODE=ON And install the patch from command line using the following syntax: patch_exe> /V"/L*v <logfile> DEBUG_MODE=ON" E.g. d2005_arch_upd2.exe /V"/L*v C:tempd2005_upd1.log DEBUG_MODE=ON" Please send these log files directly to me. Thanks, Brindha. "Rob Roberts" <robrRemoveThis (AT) AndThisToo (DOT) pcisys.net> wrote in message news:4231fefe$1 (AT) newsgroups (DOT) borland.com... I just installed the D2005 Pro Update 2. It seemed to install successfully. It took about an hour, asked me to insert two of the D2005 CDs along the way, and seemed to finish successfully with no error messages. But Help/About still shows Update 1 and build 9.0.1761.24408. According to a message I saw posted in non-tech, the build should be 9.0.1882.30496. What went wrong, and what can I do about it? Thanks, --Rob Roberts Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First         BorlandTalk.com Forum Index -> Delphi Installation All times are GMT Goto page 1, 2  Next Page 1 of 2   Jump to: Select a forum C++ Builder Newsgroups----------------C++ BuilderC++ Builder (ActiveX)C++ Builder (Announcements)C++ Builder (Command Line Tools)C++ Builder DatabasesC++ Builder Databases (ADO)C++ Builder Databases (Desktop)C++ Builder Databases (InterBase Express)C++ Builder Databases (Multi-Tier)C++ Builder Databases (SQL Servers)C++ Builder (Graphics)C++ Builder (IDE)C++ Builder (Internet)C++ Builder (Internet Socket)C++ Builder (Internet Web)C++ Builder (Jobs)C++ Builder (Language)C++ Builder (Language C++)C++ Builder (Compatibility with MFC)C++ Builder (Native API)C++ Builder (Non-Technical)C++ Builder (Students)C++ Builder (Third Party Tools)C++ Builder (Upgrade)C++ Builder (VCL)C++ Builder (VCL Components Usage)C++ Builder (VCL Components Development)C++ Builder (VCL Usage)C++ Builder (WinAPI)C++ Builder Installation Delphi Newsgroups----------------Delphi (General)Delphi ActiveX Controls UsageDelphi ActiveX Controls DevelopmentDelphi As400Delphi DatabasesDelphi Databases (ADO)Delphi Databases (dbExpress)Delphi Databases (Desktop)Delphi Databases (InterBase Express)Delphi Databases (Multi-Tier)Delphi Databases (SQL Servers)Delphi DeploymentDelphi GraphicsDelphi IDEDelphi InternationalizationDelphi InternetDelphi Internet Isapi-WebBrokerDelphi Internet WebSnapDelphi Internet WinsockDelphi JobsDelphi Language BASMDelphi Language ObjectPascalDelphi Model Driven Architecture (General)Delphi Model Driven Architecture (Third Party)Delphi MultimediaDelphi Native APIDelphi Non-TechnicalDelphi ObjectPascalDelphi OLE AutomationDelphi OO designDelphi OpenToolsAPIDelphi Reporting-ChartingDelphi RTLDelphi StudentsDelphi TeamSourceDelphi Thirdparty ToolsDelphi Thirdparty Tools (General)Delphi Thirdparty Tools (IntraWeb)Delphi Thirdparty Tools (RaveReports)Delphi UpgradeDelphi VCLDelphi VCL ComponentsDelphi VCL Components UsingDelphi VCL Components WritingDelphi WebServices SOAPDelphi WinAPIDelphi XMLDelphi Installationcomp.lang.pascal.delphi.components.misccomp.lang.pascal.delphi.components.usagecomp.lang.pascal.delphi.components.writingcomp.lang.pascal.delphi.databasescomp.lang.pascal.delphi.misccomp.sources.delphi JBuilder Newsgroups----------------JBuilderJBuilder AnnouncementsJBuilder Applet IssuesJBuilder As400JBuilder CompilerJBuilder CORBA/RMIJBuilder DatabasesJBuilder DB SwingJBuilder DebuggerJBuilder DeploymentJBuilder DocumentationJBuilder EnterpriseJBuilder HandheldJBuilder IDEJBuilder JavaJBuilder JavaAPIJBuilder Java LanguageJBuilder Java SwingJBuilder Java BeansJBuilder Java Beans UsageJBuilder Java Beans DevelopmentJBuilder JBCLJBuilder JDataStoreJBuilder JobsJBuilder LinuxJBuilder MacintoshJBuilder & MobileSetJBuilder MultiLingual AppsJBuilder Non-TechnicalJBuilder OpenToolsJBuilder Servlets (JSP)JBuilder StudentsJBuilder Team DevelopmentJBuilder Thirdparty ToolsJBuilder UpgradeJBuilder Installation InterBase Newsgroups----------------InterBaseInterBase Bug DiscussionInterBase GeneralInterBase IBConsoleInterBase OpenSourceInterBase ReplicationInterBase SQLInterBase ThirdpartyInterBase Installation Miscellaneous Borland Newsgroups----------------AppCenterAppServerEnteraVisiBroker  You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum Powered by phpBB © 2001, 2006 phpBB Group SEO toolkit © 2004-2006 webmedic.